Visualitzant Articles publicats (D-EMCI) per autor "Ciurana, Quim de"

Visualitzant Articles publicats (D-EMCI) per autor "Ciurana, Quim de"

orcId Ciurana, Quim de scopusId Ciurana, Quim de

Ara es mostren els resultats 1-24 de 37

Swarm Intelligent Selection and Optimization of Machining System Parameters for Microchannel Fabrication in Medical Devices

2011 Article

Vázquez Lepe, Elisa Ciurana, Quim de Rodríguez González, Ciro Ángel Thepsonthi, Thanongsak et al.

An integrated parameterized tool for designing a customized tracheal stent

2012 Article

Melgoza, Evila L. Serenó, Lídia Rosell, Antoni Ciurana, Quim de

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

2012 Article

Delgado Sanglas, Jordi Ciurana, Quim de Rodríguez González, Ciro Ángel

Effect of process parameters in nanosecond pulsed laser micromachining of PMMA-based microchannels at near-infrared and ultraviolet wavelengths

2013 Article

Teixidor Ezpeleta, Daniel Orozco, Francisco Thepsonthi, Thanongsak Ciurana, Quim de et al.

Multiobjective Optimization of Laser Milling Parameters of Microcavities for the Manufacturing of DES

2013 Article

Teixidor Ezpeleta, Daniel Ciurana, Quim de Rodríguez González, Ciro Ángel

Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel

2013 Article

Teixidor Ezpeleta, Daniel Ferrer Real, Inés Ciurana, Quim de Özel, Tuǧrul

Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material

2013-03-20 Article

Ciurana, Quim de Hernández, Luis W. Delgado Sanglas, Jordi

Scanning space analysis in Selective Laser Melting for CoCrMo powder

2013-12-01 Article

Pupo, Yurivania Delgado Sanglas, Jordi Serenó, Lídia Ciurana, Quim de

Modelling laser milling of microcavities for the manufacturing of DES with ensembles

2014 Article

Santos, Pedro Rosa Teixidor Ezpeleta, Daniel Maudes, Jesús M. Ciurana, Quim de

Dross formation and process parameters analysis of fibre laser cutting of stainless steel thin sheets

2014 Article

Teixidor Ezpeleta, Daniel Ciurana, Quim de Rodríguez González, Ciro Ángel

Effects of the Selective Laser Melting manufacturing process on the properties of CoCrMo single tracks

2014 Article

Monroy, Karla P. Delgado Sanglas, Jordi Serenó, Lídia Ciurana, Quim de et al.

Rapid tooling using 3D printing system for manufacturing of customized tracheal stent

2014 Article

Melgoza, Evila L. Vallicrosa Massaguer, Guillem Serenó, Lídia Ciurana, Quim de et al.

Evaluation of machine-tool motion accuracy using a CNC machining center in micro-milling processes

2014-01 Article

Vázquez Lepe, Elisa Gomar, Jéssica Ciurana, Quim de Rodríguez González, Ciro Ángel

Modeling pulsed laser micromachining of micro geometries using machine-learning techniques

2015 Article

Teixidor Ezpeleta, Daniel Grzenda, Maciej Bustillo Iglesias, Andrés Ciurana, Quim de

Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V

2015 Article

Vázquez Lepe, Elisa Gomar, Jéssica Ciurana, Quim de Rodríguez González, Ciro Ángel

Spectrum Transmission Measurement of a Fiber Laser Beam in Polymethyl Metacrylate for Laser Sintering Processing

2015 Article

Monroy, Karla P. Pupo, Yurivania Serenó, Lídia Ciurana, Quim de

Thermal model for curing implantable silicone in the moulding process applied to tracheal stents

2015 Article

Freitas, Matheus S. Serenó, Lídia Silveira, Zilda C. Da Silva, Jorge Vicente Lopes et al.

Geometrical feature analysis of Co-Cr-Mo single tracks after selective laser melting processing

2015 Article

Monroy, Karla P. Delgado Sanglas, Jordi Serenó, Lídia Ciurana, Quim de et al.

Study of the Ultrasonic Molding Process Parameters for Manufacturing Polypropylene Parts

2015 Article

Negre Gubau, Paula Grabalosa Saubí, Jordi Ferrer Real, Inés Ciurana, Quim de

Process planning considerations for micromilling of mould cavities used in ultrasonic moulding technology

2015 Article

Vázquez Lepe, Elisa Amaro, Alan Ciurana, Quim de Rodríguez González, Ciro Ángel

Forming force and temperature effects on single point incremental forming of polyvinylchloride

2015-05 Article

Bagudanch Frigolé, Isabel Garcia-Romeu, Maria Luisa Centeno Báez, Gabriel Elías-Zúñiga, Alex et al.

FRF Estimation through Sweep Milling Force Excitation (SMFE)

2016-01-01 Article

Iglesias, Alexander Muñoa Gorostidi, Jokin Ramírez, Christian Ciurana, Quim de et al.

Influence of processing conditions on manufacturing polyamide parts by ultrasonic molding

2016-05-15 Article

Ciurana, Quim de Grabalosa Saubí, Jordi Ferrer Real, Inés Elías-Zúñiga, Alex

New method for medical devices design and manufacture: Case study-scapholunate implant

2016-10-01 Article

Ferrer Mallorquí, Inès Grabalosa Saubí, Jordi Salvador, Antoni Elías-Zúñiga, Alex et al.

Ara es mostren els resultats 1-24 de 37