Articles publicats (D-EMCI)

​
​
​
Discover
Author 
Subject 
Date Issued 
Type 
Language (ISO) 
Access conditions 
Funding Programme 
Project Acronym 
​
​
Jerarquia  ​

Rate-dependency analysis of mode I delamination by means of different data reduction strategies for the GDCB test method

A new Coplanar Dual Core Buckling-Restrained Brace

Experimental and virtual testing of a composite-aluminium aircraft wingbox under thermal loading

Sensitivity analysis of a particle retention model and application to a pressurised sand bed filter for drip irrigation

Numerical and Experimental Analysis of the Mode I Interlaminar Fracture Toughness in Multidirectional 3D-Printed Thermoplastic Composites Reinforced with Continuous Carbon Fiber

Accurate simulation of delamination under mixed-mode loading using a multilinear cohesive law

A methodology for the experimental characterization of energy release rate-controlled creep crack growth under mode I loading

An efficient ERR-Cohesive method for the modelling of delamination propagation with large elements

Benchmark test for mode I fatigue-driven delamination in GFRP composite laminates: Experimental results and simulation with the inter-laminar damage model implemented in SAMCEF

Guided Double Cantilever Beam test method for intermediate and high loading rates in composites

Intralaminar crack growth rates of a glass fibre multiaxial laminate subjected to variable amplitude loading

Design optimization of plate-fin heat sink with forced convection for single-module thermoelectric generator

Flexural Performance and End Debonding Prediction of NSM Carbon FRP-Strengthened Reinforced Concrete Beams under Different Service Temperatures

Assessment of fib Bulletin 90 Design Provisions for Intermediate Crack Debonding in Flexural Concrete Elements Strengthened with Externally Bonded FRP

On the effective peek application for customized cranio-maxillofacial prostheses: An experimental formability analysis

Effect of fatigue loading on flexural performance of NSM CFRP-strengthened RC beams under different service temperatures

Characterization of direct ink write pure silk fibroin based on alcohol post-treatments

A three-dimensional plastic-damage model for polymer composite materials

Time-dependent behavior of NSM CFRP-strengthened RC beams under different service temperatures

Bed expansion at backwashing in pressurised porous media filters for drip irrigation: Numerical simulations and analytical equations

Testing and simulation of a composite-aluminium wingbox subcomponent subjected to thermal loading

A swarm optimizer with modified feasible-based mechanism for optimum structure in steel industry

Towards compliance with the prospective EURO VII NOx emissions limit using a thermoelectric aftertreatment heater

Analysis of mode I fracture toughness of adhesively bonded joints by a low friction roller wedge driven quasi-static test