Curie temperature in Fe(Ni)Nb based mechanically alloyed materials

​
orcId Suñol Martínez, Joan Josep​ researcherId Suñol Martínez, Joan Josep​ scopusId Suñol Martínez, Joan Josep​ ​
Suñol Martínez, Joan Josep
​ ​ ​ ​
González Gasch, Àlex
orcId Escoda i Acero, Ma. Lluïsa​ ​ scopusId Escoda i Acero, Ma. Lluïsa​ ​
Escoda i Acero, Ma. Lluïsa
​ ​ ​ ​
Vilaró, A.
Texto Completo
Curie-temperature.pdf embargoed access ​
Solicita copia
Solicita copia
Al rellenar este formulario estáis solicitando una copia del artículo, depositado en el repositorio institucional (DUGiDocs), a su autor o al autor principal del artículo. Será el mismo autor quien decidirá enviar una copia del documento a quien lo solicite si lo considera oportuno. En todo caso, la Biblioteca de la UdG no interviene en este proceso ya que no está autorizada a facilitar artículos cuando éstos son de acceso restringido.
​
Compartir
​
A conventional thermogravimeter has been adapted with a small magnet to detect the Curie temperature, T C. The measurements were performed in several Fe(Ni)NbB alloys developed in a nanocrystalline form by mechanical alloying. The B addition favors a slight diminution (10-20°C), and the Ni addition the existence of three transitions related with bccFe, fcc(Fe-Ni) abd fccNi-rich environments. Furthermore, complementary analysis were performed by means of differential thermal analysis, scanning electron microscopy with energy dispersive X-ray microanalysis and by induced coupled plasma. Small contamination was found. A mass increase (about 1 mass%) was detected by thermogravimetry related to oxidation. Analysis allows us to state the inhomogeneity of the alloys obtained after 80 h of milling ​
​Tots els drets reservats
Mostrar el registro completo del ítem