Curie temperature in Fe(Ni)Nb based mechanically alloyed materials

​
orcId Suñol Martínez, Joan Josep​ researcherId Suñol Martínez, Joan Josep​ scopusId Suñol Martínez, Joan Josep​ ​
Suñol Martínez, Joan Josep
​ ​ ​ ​
González Gasch, Àlex
orcId Escoda i Acero, Ma. Lluïsa​ ​ scopusId Escoda i Acero, Ma. Lluïsa​ ​
Escoda i Acero, Ma. Lluïsa
​ ​ ​ ​
Vilaró, A.
Text Complet
Curie-temperature.pdf embargoed access ​
Sol·licita còpia
Sol·licita còpia a l'autor de l'article
En omplir aquest formulari esteu demanant una còpia de l'article dipositat al repositori institucional (DUGiDocs) al seu autor o a l'autor principal de l'article. Serà el mateix autor qui decideixi lliurar una còpia del document a qui ho sol•liciti si ho creu convenient. En tot cas, la Biblioteca de la UdG no intervé en aquest procés ja que no està autoritzada a facilitar articles quan aquests són d'accés restringit.
​
Compartir
​
A conventional thermogravimeter has been adapted with a small magnet to detect the Curie temperature, T C. The measurements were performed in several Fe(Ni)NbB alloys developed in a nanocrystalline form by mechanical alloying. The B addition favors a slight diminution (10-20°C), and the Ni addition the existence of three transitions related with bccFe, fcc(Fe-Ni) abd fccNi-rich environments. Furthermore, complementary analysis were performed by means of differential thermal analysis, scanning electron microscopy with energy dispersive X-ray microanalysis and by induced coupled plasma. Small contamination was found. A mass increase (about 1 mass%) was detected by thermogravimetry related to oxidation. Analysis allows us to state the inhomogeneity of the alloys obtained after 80 h of milling ​
​Tots els drets reservats
Mostra el registre complet de l'element