Curie temperature in Fe(Ni)Nb based mechanically alloyed materials

​
orcId Suñol Martínez, Joan Josep​ researcherId Suñol Martínez, Joan Josep​ scopusId Suñol Martínez, Joan Josep​ ​
Suñol Martínez, Joan Josep
​ ​ ​ ​
González Gasch, Àlex
orcId Escoda i Acero, Ma. Lluïsa​ ​ scopusId Escoda i Acero, Ma. Lluïsa​ ​
Escoda i Acero, Ma. Lluïsa
​ ​ ​ ​
Vilaró, A.
Full Text
Curie-temperature.pdf embargoed access ​
Request a copy
Request a copy
When filling the form you are requesting a copy of the article, that is deposited in the institutional repository (DUGiDocs), at the autor or main autor of the article. It will be the same author who decides to give a copy of the document to the person who requests it, if it considers it appropriate. In any case, the UdG Library doesn’t take part in this process because it is not authorized to provide restricted articles.
​
Share
​
A conventional thermogravimeter has been adapted with a small magnet to detect the Curie temperature, T C. The measurements were performed in several Fe(Ni)NbB alloys developed in a nanocrystalline form by mechanical alloying. The B addition favors a slight diminution (10-20°C), and the Ni addition the existence of three transitions related with bccFe, fcc(Fe-Ni) abd fccNi-rich environments. Furthermore, complementary analysis were performed by means of differential thermal analysis, scanning electron microscopy with energy dispersive X-ray microanalysis and by induced coupled plasma. Small contamination was found. A mass increase (about 1 mass%) was detected by thermogravimetry related to oxidation. Analysis allows us to state the inhomogeneity of the alloys obtained after 80 h of milling ​
​Tots els drets reservats
Show full item record