{ "dc.contributor.author": "Sánchez Llamazares, José Luis" , "dc.contributor.author": "Sánchez Fernández, Tatiana" , "dc.contributor.author": "Santos Rodríguez, Jesús Daniel" , "dc.contributor.author": "Pérez Fernández, María José" , "dc.contributor.author": "Sánchez Rodríguez, M. Luisa" , "dc.contributor.author": "Hernando, Blanca" , "dc.contributor.author": "Escoda i Acero, Ma. Lluïsa" , "dc.contributor.author": "Suñol Martínez, Joan Josep" , "dc.contributor.author": "Varga, Rastislav" , "dc.date.accessioned": "2013-11-13T08:18:08Z" , "dc.date.available": "2013-11-13T08:18:08Z" , "dc.date.issued": "2008" , "dc.identifier.issn": "0003-6951" , "dc.identifier.uri": "http://hdl.handle.net/10256/8579" , "dc.description.abstract": "Heusler alloy Mn50Ni40In10 was produced as preferentially textured ribbon flakes by melt spinning, finding the existence of martensitic-austenic transformation with both phases exhibiting ferromagnetic ordering. A microcrystalline three-layered microstructure of ordered columnar grains grown perpendicularly to ribbon plane was formed between two thin layers of smaller grains. The characteristic temperatures of the martensitic transformation were MS=213 K, Mf=173 K, AS=222 K, and Af=243 K. Austenite phase shows a cubic L21 structure (a=0.6013(3) nm at 298 K and a Curie point of 311 K), transforming into a modulated fourteen-layer modulation monoclinic martensite" , "dc.format.mimetype": "application/pdf" , "dc.language.iso": "eng" , "dc.publisher": "American Institute of Physics" , "dc.relation.isformatof": "Reproducció digital del document publicat a: http://dx.doi.org/10.1063/1.2827179" , "dc.relation.ispartof": "© Applied Physics Letters, 2008, vol. 2, núm. 1, p. 012513" , "dc.relation.ispartofseries": "Articles publicats (D-F)" , "dc.rights": "Tots els drets reservats" , "dc.subject": "Aliatges" , "dc.subject": "Alloys" , "dc.subject": "Microestructura" , "dc.subject": "Microstructure" , "dc.subject": "Transformacions martensítiques" , "dc.subject": "Martensitic transformations" , "dc.title": "Martensitic phase transformation in rapidly solidified Mn50Ni40In10 alloy ribbons" , "dc.type": "info:eu-repo/semantics/article" , "dc.rights.accessRights": "info:eu-repo/semantics/openAccess" , "dc.embargo.terms": "Cap" , "dc.type.version": "info:eu-repo/semantics/publishedVersion" , "dc.identifier.doi": "http://dx.doi.org/10.1063/1.2827179" , "dc.identifier.idgrec": "010086" , "dc.identifier.eissn": "1077-3118" }