{ "dc.contributor.author": "Delgado Sanglas, Jordi" , "dc.contributor.author": "Ciurana, Quim de" , "dc.contributor.author": "Rodríguez González, Ciro Ángel" , "dc.date.accessioned": "2012-10-17T12:38:17Z" , "dc.date.available": "2012-10-17T12:38:17Z" , "dc.date.issued": "2012" , "dc.identifier.issn": "0268-3768 (versió paper)" , "dc.identifier.issn": "1433-3015 (versió electrònica)" , "dc.identifier.uri": "http://hdl.handle.net/10256/7144" , "dc.description.abstract": "Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders" , "dc.format.mimetype": "application/pdf" , "dc.language.iso": "eng" , "dc.relation.isformatof": "Reproducció digital del document publicat a: http://dx.doi.org/10.1007/s00170-011-3643-5" , "dc.relation.ispartof": "© The International Journal of Advanced Manufacturing Technology, 2012, vol. 60, núm. 5-8, p. 601-610" , "dc.relation.ispartofseries": "Articles publicats (D-EMCI)" , "dc.rights": "Tots els drets reservats" , "dc.subject": "Fabricació -- Automatització" , "dc.subject": "Fabricació -- Innovacions tecnològiques" , "dc.subject": "Enginyeria de la producció" , "dc.subject": "Production engineering" , "dc.subject": "Manufacturing processes -- Automation" , "dc.subject": "Manufacturing processes -- Technological innovations" , "dc.title": "Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials" , "dc.type": "info:eu-repo/semantics/article" , "dc.rights.accessRights": "info:eu-repo/semantics/embargoedAccess" , "dc.relation.projectID": "info:eu-repo/grantAgreement/EC/FP7/247476" , "dc.type.version": "info:eu-repo/semantics/publishedVersion" , "dc.identifier.doi": "http://dx.doi.org/10.1007/s00170-011-3643-5" , "dc.identifier.idgrec": "015072" }