{ "dc.contributor.author": "Ciurana, Quim de" , "dc.contributor.author": "Grabalosa Saubí, Jordi" , "dc.contributor.author": "Ferrer Real, Inés" , "dc.contributor.author": "Elías-Zúñiga, Alex" , "dc.date.accessioned": "2016-11-17T12:48:34Z" , "dc.date.available": "2016-11-17T12:48:34Z" , "dc.date.issued": "2016-05-15" , "dc.identifier.issn": "0261-3069 (versió paper)" , "dc.identifier.issn": "0264-1275 (versió electrònica)" , "dc.identifier.uri": "http://hdl.handle.net/10256/13165" , "dc.description.abstract": "Ultrasonic molding is a new manufacturing process for producing small and micro polymeric components where the material is plasticized using vibration energy. In small parts manufacturing, replicability is usually demanded. Downscaled tensile specimens were manufactured using ultrasonic molding on polyamide pellets not only to obtain specimens, but also to investigate the influence of the processing conditions on process performance and material characterization. A modeling approach is proposed to assess the energy flow involved in the process. It was observed that 300 mg of polyamide could be plasticized and injected in less than 3 s and the results showed a relationship between the processing conditions and the final product, i.e. the higher the values of applied pressure, ultrasonic time and vibration amplitude, the more accurate and more homogeneous parts were. Moreover, the material did not suffer chemical degradation, but light variation on the molecular weight and different chain alignment along the specimen were detected. The mechanical properties measured were slightly influenced by the processing conditions and were in accordance with what would be expected for that particular material when being processed using conventional injection molding" , "dc.description.sponsorship": "The project was carried out under the DPI2013-45201-P reference grant awarded by the Spanish Government and with the financial support from the University of Girona (Spain) MPCUdG2016/036, and to the Consejo Nacional de Ciencia y Tecnología de México (CONACYT), Project Number 242269" , "dc.format.mimetype": "application/pdf" , "dc.language.iso": "eng" , "dc.publisher": "Elsevier" , "dc.relation": "MINECO/PE 2014-2016/DPI2013-45201-P" , "dc.relation.isformatof": "Reproducció digital del document publicat a: http://dx.doi.org/10.1016/j.matdes.2016.02.122" , "dc.relation.ispartof": "© Materials and Design, 2016, vol. 98, p. 20-30" , "dc.relation.ispartofseries": "Articles publicats (D-EMCI)" , "dc.rights": "Tots els drets reservats" , "dc.subject": "Materials biomèdics" , "dc.subject": "Biomedical materials" , "dc.subject": "Ultrasons -- Aplicacions industrials" , "dc.subject": "Ultrasonic waves -- Industrial applications" , "dc.title": "Influence of processing conditions on manufacturing polyamide parts by ultrasonic molding" , "dc.type": "info:eu-repo/semantics/article" , "dc.rights.accessRights": "info:eu-repo/semantics/embargoedAccess" , "dc.embargo.terms": "Cap" , "dc.type.version": "info:eu-repo/semantics/publishedVersion" , "dc.identifier.doi": "http://dx.doi.org/10.1016/j.matdes.2016.02.122" , "dc.identifier.idgrec": "025145" , "dc.contributor.funder": "Ministerio de Economía y Competitividad (Espanya)" }