Articles publicats (D-EMCI)

​
​
​
Filtra
Autor/a 
Matèria 
Data 
Tipus 
Llengua (ISO) 
Condicions d'accés 
Programa de finançament 
Projecte 
Objectius de desenvolupament sostenible 
​
​
Jerarquia  ​

A validated simulation methodology for determining single lap shear allowable strength in thermoplastic polymer composites

Effect of ply misalignment on the notched strength of composite laminates

Hydraulic performance analysis of new versus commercial nozzle design for pressurised porous media filters

A simulation strategy for fatigue modeling of delamination in composite structures under multiple loading conditions considering loading history and -curve effects

Experimental and virtual testing of mode II and mixed mode crack propagation under dynamic loading

Assessment of damage sequence in additive manufactured composite laminates under quasi-static out-of-plane loading

Analysis of creep crack growth in bonded joints based on a Paris' law-like approach

On how pseudo-ductility modifies the translaminar fracture toughness of composites and the nominal strength of centre-cracked specimens

A method for modelling arbitrarily shaped delamination fronts with large and distorted elements

A three-dimensional viscoelastic–viscoplastic and viscodamage constitutive model for unidirectional fibre-reinforced polymer laminates

A fatigue test based on inclined loading block concept to benchmark delamination growth considering loading history and R-curve effect

Feasibility assessment of polyvinyl alcohol-based bioresorbable cardiovascular stents manufactured via solvent-cast direct writing extrusion

Influence of unidirectional composite failure envelope shape on predicting compressive failure of a laminate with a filled-hole

Characterization of plastic formability and failure mechanisms in FDM additively manufactured PETG and PCL sheets

Modification of nominal strength scaling laws to pseudo-ductility

A novel methodology to measure the transverse Poisson's ratio in the elastic and plastic regions for composite materials

Numerical modelling of multi-directional thin-ply carbon/glass hybrid composites with open holes under tension

An enhanced constitutive model to predict plastic deformation and multiple failure mechanisms in fibre-reinforced polymer composite materials

Micromechanical analysis of composite materials considering material variability and microvoids

Pressurised sand bed filtration model: Set up and energy requirements for a filtration cycle

Characterization of Interlaminar Friction during the Forming Processes of High-Performance Thermoplastic Composites

Analysis of FRP-strengthened reinforced concrete beams using electromechanical impedance technique and digital image correlation system

An Innovative Stereolithography 3D Tubular Method for Ultrathin Polymeric Stent Manufacture: The Effect of Process Parameters

Statistical Study of the Process Parameters for Achieving Continuous Consolidation of a Thermoplastic Composite