Visualitzant Articles publicats (D-EMCI) per títol

Ara es mostren els resultats 1-24 de 247

següent

3D-Printed PCL/PLA Composite Stents: Towards a New Solution to Cardiovascular Problems

2018-09-11 Article

Guerra Sánchez, Antonio Cano Calvo, Paula Rabionet Díaz, Marc Puig i Miquel, Teresa et al.

A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads

2013-04 Article

Badalló i Cañellas, Pere Trias Mansilla, Daniel Marín Hernández, Lorena Mayugo Majó, Joan Andreu

A constitutive model for a novel modular all-steel buckling restrained brace

2015 Article

Piedrafita Francos, Daniel Maimí Vert, Pere Cahís Carola, Francesc Xavier

A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test

2016-11-01 Article

Pérez Galmés, Magdalena Renart Canalias, Jordi Sarrado Molina, Carlos Rodríguez Bellido, Ana Teresa et al.

A fatigue test based on inclined loading block concept to benchmark delamination growth considering loading history and R-curve effect

2024-06-01 Article

Leciñana Arregui, Iñaki Renart Canalias, Jordi Carreras Blasco, Laura Turon Travesa, Albert et al.

A general analytical model based on elastic foundation beam theory for adhesively bonded DCB joints either with flexible or rigid adhesives

2016-09 Article

Cabello Ulloa, Mario Javier Zurbitu González, Javier Renart Canalias, Jordi Turon Travesa, Albert et al.

A method for modelling arbitrarily shaped delamination fronts with large and distorted elements

2024-08-05 Article

Daniel, Pierre M. Främby, Johannes Fagerström, Martin Maimí Vert, Pere

A methodology for the experimental characterization of energy release rate-controlled creep crack growth under mode I loading

2023-04-28 Article

Meulman, Edwin Renart Canalias, Jordi Carreras Blasco, Laura Zurbitu González, Javier

A Micromechanics-Based Damage Model for [± θ / 90n ]s Composite Laminates

2006 Article

Mayugo Majó, Joan Andreu Camanho, Pedro Manuel Ponces Rodrigues de Castro Maimí Vert, Pere Dávila, Carlos G.

A new Coplanar Dual Core Buckling-Restrained Brace

2023-07-01 Article

Cahís Carola, Francesc Xavier Catalán Artigas, Albert Benavent-Climent, A. Trias Mansilla, Daniel

A non-linear hyperelastic foundation beam theory model for double cantilever beam tests with thick flexible adhesive

2016 Article

Cabello Ulloa, Mario Javier Zurbitu González, Javier Renart Canalias, Jordi Turon Travesa, Albert et al.

A novel 3D additive manufacturing machine to biodegradable stents

2017 Article

Guerra Sánchez, Antonio Roca Calm, Albert Ciurana, Quim de

A novel methodology to measure the transverse Poisson's ratio in the elastic and plastic regions for composite materials

2024-03-01 Article

Cózar, Ivan R. Arbeláez Toro, Juan José Maimí Vert, Pere Otero, Fermin et al.

A quasi-static indentation test to elucidate the sequence of damage events in low velocity impacts on composite laminates

2016 Article

Wagih Abdallah Abdel Hady, Ahmed Maimí Vert, Pere Blanco Villaverde, Norbert Costa i Balanzat, Josep

A quick procedure to predict free-edge delamination in thin-ply laminates under tension

2016-12 Article

Guillamet Busquets, Gerard Turon Travesa, Albert Costa i Balanzat, Josep Linde, Peter

A simulation method for high-cycle fatigue-driven delamination using a cohesive zone model

2016-04-20 Article

Bak, Brian Lau Verndal Turon Travesa, Albert Lindgaard, Esben Lund, Erik

A simulation strategy for fatigue modeling of delamination in composite structures under multiple loading conditions considering loading history and -curve effects

2024-11 Article

Leciñana Arregui, Iñaki Carreras Blasco, Laura Renart Canalias, Jordi Zurbitu González, Javier et al.

A swarm optimizer with modified feasible-based mechanism for optimum structure in steel industry

2022-09-14 Article

Nouhi, B. Jahani, Younes Talatahari, S. Gandomi, A.H.

A Thermodynamically Consistent Damage Model for Advanced Composites

2006 Article

Maimí Vert, Pere Camanho, Pedro Manuel Ponces Rodrigues de Castro Mayugo Majó, Joan Andreu Dávila, Carlos G.

A three-dimensional plastic-damage model for polymer composite materials

2022-12 Article

Cózar, Ivan R. Otero, Fermin Maimí Vert, Pere González Juan, Emilio Vicente et al.

A three-dimensional viscoelastic–viscoplastic and viscodamage constitutive model for unidirectional fibre-reinforced polymer laminates

2024-07-26 Article

Cózar, Ivan R. Maimí Vert, Pere González Juan, Emilio Vicente Camanho, Pedro Manuel Ponces Rodrigues de Castro et al.

Accurate simulation of delamination under mixed-mode loading using a multilinear cohesive law

2023-05-19 Article

Abdel Monsef, Said Ahmed Ibrahim Tijs, Bas H.A.H. Renart Canalias, Jordi Turon Travesa, Albert

Accurate γ and MeV-electron track reconstruction with an ultra-low diffusion Xenon/TMA TPC at 10 atm

2015-12-21 Article

González-Díaz, Diego Álvarez Puerta, Vicente Borges, Filipa I.G.M. Camargo, Manuel A. et al.

An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen's compliance

2016 Article

Renart Canalias, Jordi Vicens Cuyàs, Josep Budhe, Sandip Rudha Rodríguez Bellido, Ana Teresa et al.

Ara es mostren els resultats 1-24 de 247

següent