Visualitzant Articles publicats (D-EMCI) per matèria "Assaigs de materials"

Ara es mostren els resultats 25-48 de 70

anterior següent

An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach

2015-09-29 Article

Sarrado Molina, Carlos Turon Travesa, Albert Renart Canalias, Jordi Costa i Balanzat, Josep

Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars

2016 Article

Baena Muñoz, Marta Torres Llinàs, Lluís Turon Travesa, Albert Llorens Sulivera, Miquel et al.

An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen's compliance

2016 Article

Renart Canalias, Jordi Vicens Cuyàs, Josep Budhe, Sandip Rudha Rodríguez Bellido, Ana Teresa et al.

Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms

2016-01-18 Article

Marín Hernández, Lorena González Juan, Emilio Vicente Maimí Vert, Pere Trias Mansilla, Daniel et al.

Cohesive zone length of orthotropic materials undergoing delamination

2016-07-01 Article

Soto Masip, Albert González Juan, Emilio Vicente Maimí Vert, Pere Turon Travesa, Albert et al.

Experimental study of the influence of adhesive properties and bond length on the bond behaviour of NSM FRP bars in concrete

2016-08-17 Article

Barris Peña, Cristina Baena Muñoz, Marta Torres Llinàs, Lluís Sharaky, Ibrahim Attia

Numerical simulation of bond-slip interface and tension stiffening in GFRP RC tensile elements

2016-10-01 Article

Vilanova Marco, Irene Torres Llinàs, Lluís Baena Muñoz, Marta Llorens Sulivera, Miquel

An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws

2016-11 Article

Sarrado Molina, Carlos Turon Travesa, Albert Costa i Balanzat, Josep Renart Canalias, Jordi

A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test

2016-11-01 Article

Pérez Galmés, Magdalena Renart Canalias, Jordi Sarrado Molina, Carlos Rodríguez Bellido, Ana Teresa et al.

A quick procedure to predict free-edge delamination in thin-ply laminates under tension

2016-12 Article

Guillamet Busquets, Gerard Turon Travesa, Albert Costa i Balanzat, Josep Linde, Peter

Characterization of the translaminar fracture Cohesive Law

2016-12-01 Article

Ortega Novillo, Adrián Maimí Vert, Pere González Juan, Emilio Vicente Trias Mansilla, Daniel

An efficient methodology for the experimental characterization of mode II delamination growth under fatigue loading

2017-02-01 Article

Carreras Blasco, Laura Renart Canalias, Jordi Turon Travesa, Albert Costa i Balanzat, Josep et al.

Translaminar fracture toughness of interply hybrid laminates under tensile and compressive loads

2017-05-03 Article

Ortega Novillo, Adrián Maimí Vert, Pere González Juan, Emilio Vicente Sainz de Aja, J.R. et al.

Deformation analysis of reinforced concrete ties: Representative geometry

2017-08-01 Article

Gribniak, Viktor Rimkus, Arvydas Torres Llinàs, Lluís Jakstaite, Ruta

Revisiting formability and failure of polymeric sheets deformed by Single Point Incremental Forming

2017-10 Article

Bagudanch Frigolé, Isabel Centeno Báez, Gabriel Vallellano, Carpóforo Garcia-Romeu, Maria Luisa

Experimental study into compression after impact strength of laminates with conventional and nonconventional ply orientations

2017-10-01 Article

Liv, Yi Guillamet Busquets, Gerard Costa i Balanzat, Josep González Juan, Emilio Vicente et al.

Effect of sustained loading and environmental conditions on the creep behavior of an epoxy adhesive for concrete structures strengthened with CFRP laminates

2017-11-15 Article

Emara, Mohamed Reda Ali Elewa Torres Llinàs, Lluís Baena Muñoz, Marta Barris Peña, Cristina et al.

Revisiting Formability and Failure of AISI304 Sheets in SPIF: Experimental Approach and Numerical Validation

2017-11-28 Article

Centeno Báez, Gabriel Martínez-Donaire, Andrés Jesús Bagudanch Frigolé, Isabel Morales-Palma, Domingo et al.

Unsymmetrical stacking sequences as a novel approach to tailor damage resistance under out-of-plane impact loading

2019-03-22 Article

Sasikumar, Aravind Costa i Balanzat, Josep Trias Mansilla, Daniel González Juan, Emilio Vicente et al.

An EMI-Based Clustering for Structural Health Monitoring of NSM FRP Strengthening Systems

2019-08-13 Article

Perera, Ricardo Torres Llinàs, Lluís Ruiz, Antonio Barris Peña, Cristina et al.

Effect of Temperature on Bond Behavior of Externally-Bonded FRP 1 Laminates with Mechanical End Anchorage

2019-10-01 Article

Correia, L. Barris Peña, Cristina França, P. Sena-Cruz, José

Characterization and Simulation of the Bond Response of NSM FRP Reinforcement in Concrete

2020-04-09 Article

Gómez Colom, Javier Torres Llinàs, Lluís Barris Peña, Cristina

Effect of environment conditioning on mode II fracture behaviour of adhesively bonded joints

2021-04-01 Article

Abdel Monsef, Said Ahmed Ibrahim Renart Canalias, Jordi Carreras Blasco, Laura Turon Travesa, Albert et al.

Characterization of debonding between two different materials with beam like geometries

2021-04-15 Article

Maimí Vert, Pere Renart Canalias, Jordi Sarrado Molina, Carlos González Juan, Emilio Vicente

Ara es mostren els resultats 25-48 de 70

anterior següent