Rejection of organic micropollutants from greywater with forward osmosis: A matter of time

Full Text
AM_EMendoza.pdf embargoed access
Request a copy
When filling the form you are requesting a copy of the article, that is deposited in the institutional repository (DUGiDocs), at the autor or main autor of the article. It will be the same author who decides to give a copy of the document to the person who requests it, if it considers it appropriate. In any case, the UdG Library doesn’t take part in this process because it is not authorized to provide restricted articles.
Share
Forward osmosis (FO) has popularized lately due to its lower fouling propensity, higher pollutant rejection, and potentially lower energy consumption than other membrane technologies. Greywater (GW) is a good candidate for FO treatment for its further reuse due to its lower organic and solids content than other wastewater streams, but it contains organic micropollutants (OMP) that might pose a risk for its reuse. Seawater (NaCl) is widely used as draw solution, but the use of fertilizers instead offers the advantage of applying the diluted draw solution for irrigation. This study evaluated the performance of FO for GW treatment focusing on OMP rejection, by means of tests with fertilizers or NaCl as draw solutions and deionized water or GW as feed solutions. The main GW constituents were well rejected, except for sodium, which diffused to the draw solution. Excellent OMP rejection was obtained (>95% in most cases, average 98.5% rejection at the end of the experiments), which was influenced by experimental conditions and OMP properties. Highest rejections were observed for negatively charged OMP and for neutral/positive charged OMP with large molecular weight. Feed type and contact time between feed and draw solutions had the biggest influence on OMP rejection, which decreased over time and by using GW instead of deionized water as feed solution. The diluted draw solution proved safe for irrigation water reuse purposes although sodium content could be of concern. Further studies on the contact time between the solutions are required to foster further applications of FO, as it clearly influenced the rejection of OMP, aspect that is crucial for safe water reuse applications ​
This document is licensed under a Creative Commons:Attribution - Non commercial - No Derivate Works (by-nc-nd) Creative Commons by-nc-nd4.0