Modelització no lineal amb elements finits d'elements de formigó armat
dc.contributor
dc.contributor.author
dc.contributor.other
dc.date.accessioned
2022-06-23T11:04:01Z
dc.date.available
2022-06-23T11:04:01Z
dc.date.issued
2020-06-01
dc.identifier.uri
dc.description.abstract
És habitual que el càlcul d’estructures es basi en mètodes que suposin un comportament
lineal i elàstic de l’estructura. Aquests mètodes, juntament amb els codis de disseny i les
normes existents, permeten dimensionar els elements estructurals més habituals, assegurant
les estructures. Tanmateix, existeixen casos singulars que poden requerir un anàlisis més
detallat en el que s’hagi de tenir en compte un comportament més ajustat a les lleis
constitutives dels materials (no linealitat del material) i/o s’hagi de contemplar la influència
de les possibles deformacions de la mateixa estructura (no linealitat geomètrica). En aquests
casos, una de les eines més utilitzades és la simulació mitjançant el mètode dels elements
finits.
Històricament, alguns dels programes més utilitzats han estat Abacus o Ansys, els quals
donen uns resultats molt satisfactoris en la majoria de casos. No obstant, aquests programes
són molt genèrics i a vegades succeeix que el seu ús per a la modelització d’elements de
formigó i/o formigó armat resulta complexa. És per això que s’ha decidit buscar programes
especialitzats que estiguin pensats -des dels seus orígens- per aquest tipus d’anàlisis, com ara
el programa ATENA
It is common for the calculation of structures to be based on methods that involve behavior
linear and elastic structure. These methods, along with the design codes and
existing standards, allow sizing the most common structural elements, ensuring
the structures. However, there are unique cases that may require further analysis
detailed in which more law-abiding behavior should be taken into account
constituents of the materials (non-linearity of the material) and / or the influence must be considered
of the possible deformations of the same structure (non-geometric linearity). On these
cases, one of the most used tools is the simulation by means of the method of the elements
finite.
Historically, some of the most used programs have been Abacus or Ansys, which
they give very satisfactory results in most cases. However, these programs
are very generic and sometimes it happens that their use for modeling elements of
concrete and / or reinforced concrete is complex. That's why we decided to look for programs
which are designed - from the outset - for this type of analysis, such as
the ATENA program
dc.format.mimetype
application/zip
dc.language.iso
cat
dc.relation.ispartofseries
Enginyeria en Tecnologies Industrials (TFG)
dc.rights
Attribution-NonCommercial-NoDerivatives 4.0 International
dc.rights.uri
dc.subject
dc.title
Modelització no lineal amb elements finits d'elements de formigó armat
dc.type
info:eu-repo/semantics/bachelorThesis
dc.rights.accessRights
info:eu-repo/semantics/openAccess
dc.audience.educationlevel
Estudis de grau