Novel housing designs for nanofiltration and ultrafiltration gravity-driven recycled membrane-based systems
dc.contributor.author
dc.date.accessioned
2021-02-22T07:46:57Z
dc.date.available
2021-02-22T07:46:57Z
dc.date.issued
2021-05-01
dc.identifier.issn
0048-9697
dc.identifier.uri
dc.description.abstract
Ultra-low pressure gravity-driven membrane (GDM) systems have the potential to be significantly less costly and complex than conventional membranes for water treatment applications. To build upon this inherent advantage, this study assesses the reuse of recycled membranes in GDM systems for producing drinking water. Two reverse osmosis spiral-wound modules were recycled into nanofiltration (NF)-like and ultrafiltration (UF)-like membranes via controlled exposure to free chlorine. To operate the recycled membranes, two housing devices, based on a simple fitting and an advanced end-caps design, were developed. The recycled membrane systems were tested under a range of conditions (submerged vs. external system configuration and continuous vs. intermittent filtration mode). Synthetic river water feed solutions were used in the tests where performance, fouling, and clogging were measured. NF-like recycled membranes resulted in poor salt rejection and low permeability (~1.7 L m−2 h−1 bar−1), but also in high rejection (>81%) of dissolved organic carbon. UF-like recycled membranes maintained their capacity to reject biopolymers (BP) (>74%) and featured up to 18-fold higher permeate rate than NF-like recycled membranes. The optimized operating conditions were found when the recycled membranes were housed in the end-caps device and operated intermittently (relaxation time plus forward flushing). Flushing reduced the fouling accumulation inside the membrane (only 12% and 40% of BP accumulation was observed in the NF-like and UF-like, respectively). However, the end-caps-based device was estimated to be more expensive during the economic analysis. To address this techno-economic trade-off, a decision-making tree was developed to select the appropriate configuration based upon the implementation context. Overall, this study concludes that these designs can serve as robust, low-cost (water production cost <1 USD ct. yr. L−1), and light-weight GDM alternatives. This study is beneficial for developing compact GDM systems based on recycled spiral-wound membranes for both rural areas and emergency response
dc.description.sponsorship
The authors acknowledge the financial support of the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and to the Agency for Business Competitiveness of the Government of Catalonia for the grant TECSPR17-1-0019 Mem2.0 project. Special thanks to UNSW staff (Paul Brockbank, Khorshed Chinu and Yun Ye), and the collaborative companies such as TELWE S.A. (Jordi Gabarro), IMDEA Water and SACYR.
dc.format.mimetype
application/pdf
dc.language.iso
eng
dc.publisher
Elsevier
dc.relation.isformatof
Versió postprint del document publicat a: https://doi.org/10.1016/j.scitotenv.2020.144181
dc.relation.ispartof
© Science of The Total Environment, 2021, vol. 767, art.núm.144181
dc.relation.ispartofseries
Articles publicats (D-EQATA)
dc.rights
Tots els drets reservats
dc.subject
dc.title
Novel housing designs for nanofiltration and ultrafiltration gravity-driven recycled membrane-based systems
dc.type
info:eu-repo/semantics/article
dc.rights.accessRights
info:eu-repo/semantics/openAccess
dc.relation.projectID
info:eu-repo/grantAgreement/EC/H2020/712949/EU/ACCIÓ programme to foster mobility of researchers with a focus in applied research and technology transfer/TECNIOspring PLUS
dc.type.version
info:eu-repo/semantics/acceptedVersion
dc.identifier.doi
dc.identifier.idgrec
032927
dc.type.peerreviewed
peer-reviewed
dc.relation.FundingProgramme
dc.relation.ProjectAcronym
dc.identifier.eissn
1879-1026