Incremental sheet forming applied to the manufacturing of biocompatible polymer prostheses
dc.contributor
dc.contributor.author
dc.date.accessioned
2019-03-27T11:24:04Z
dc.date.available
2019-03-27T11:24:04Z
dc.date.issued
2017-11-16
dc.identifier.uri
dc.description.abstract
Incremental Sheet Forming (ISF) technology has been mainly applied on metallic sheets during the last years. ISF is used due to its flexibility, low costs, low batch production, production of complex geometries and customized prodcuts. For this reason ISF seems to be the ideal process for prosthesis production.
The main objective of the thesis is to study the ISF technology, considering Single Point Incremental Forming (SPIF) and Two Point Incremental Forming (TPIF) variants, on biocompatible polymers to obtain a real customized cranial implant. The methodology is based on the following steps: a) Experimental work in SPIF to produce basic geometries using non-biocompatible and biocompatible polymers, b) Study of the influence of the process parameters, c) Case study: customized cranial implant. Achieving the objectives established in these stages will permit to improve the knowledge about ISF process in order to successfully manufacture customized implants at a low cost and reduced time-to-market
La tecnologia de deformació incremental de xapa (ISF) s’ha aplicat majoritàriament en metalls durant els últims anys. Aquesta tecnologia es caracteritza per la flexibilitat del procés amb costos baixos, producció en lots petits, obtenció de geometries complexes i personalització del producte, el que fa que un dels camps d’aplicació de la tecnologia sigui la fabricació de pròtesis.
L’objectiu principal és el d’estudiar la tecnologia ISF, en les seves variants de Single Point Incremental Forming (SPIF) i Two Point Incremental Forming (TPIF), sobre polímers biocompatibles per obtenir una pròtesi de crani personalitzada. La metodologia es basa en: a) Experimentació en SPIF de geometries bàsiques utilitzant polímers no biocompatibles i biocompatibles, b) Determinació de la influència dels paràmetres de procés, c) Cas d’estudi: pròtesi de crani personalitzada. L’assoliment d’aquestes etapes permetrà obtenir satisfactòriament pròtesis personalitzades de crani amb un baix cost i un temps de fabricació reduït
dc.format.extent
171 p.
dc.format.mimetype
application/pdf
dc.language.iso
eng
dc.publisher
Universitat de Girona
dc.rights
L'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-sa/4.0/
dc.source
TDX (Tesis Doctorals en Xarxa)
dc.subject.other
dc.title
Incremental sheet forming applied to the manufacturing of biocompatible polymer prostheses
dc.type
info:eu-repo/semantics/doctoralThesis
dc.rights.accessRights
info:eu-repo/semantics/openAccess
dc.contributor.director
dc.subject.udc
dc.type.version
info:eu-repo/semantics/publishedVersion
dc.contributor.tutor