Modelling and simulation of tow-drop effects arising from the manufacturing of steered-fibre composites
dc.contributor.author
dc.date.accessioned
2017-05-31T07:38:21Z
dc.date.available
2017-05-31T07:38:21Z
dc.date.issued
2017-02
dc.identifier.issn
1359-835X
dc.identifier.uri
dc.description.abstract
The introduction of Variable-Stiffness Laminates requires not only the use of advanced numerical simulation tools but also better understanding of manufacturing induced effects. These computational tools can give beneficial insight that will lead to an effective reduction of test campaigns as well as to increase design possibilities. This paper presents a virtual testing approach to study the influence of tow-drop effects, generated in the manufacturing of steered-fibre composites, by means of nonlinear finite element analyses within the framework of fracture and damage mechanics. X-ray computed tomography was used to characterise the embedded resin-rich areas. Both the progressive failure mechanisms and the ultimate failure loads can be predicted with high realism when compared with experimental observations. In addition, the differences of the tow-drop effects on plain and notched laminates can also be predicted accurately
dc.description.sponsorship
The authors acknowledge the financial support of the Ministerio de Economía y Competitividad of Spain under project MAT2009-07918. The first author would also like to thank the Generalitat de Catalunya for the FI pre-doctorate Grant 2010FI_B00658
dc.format.mimetype
application/pdf
dc.language.iso
eng
dc.publisher
Elsevier
dc.relation
info:eu-repo/grantAgreement/MICINN//MAT2009-07918/ES/Desarrollo Virtual Y Validacion De Laminados No-Convencionales/
dc.relation.isformatof
Reproducció digital del document publicat a: http://dx.doi.org/10.1016/j.compositesa.2016.11.015
dc.relation.ispartof
© Composites Part A: Applied Science and Manufacturing, 2017, vol. 93, p. 59-71
dc.relation.ispartofseries
Articles publicats (D-EMCI)
dc.rights
Tots els drets reservats
dc.subject
dc.title
Modelling and simulation of tow-drop effects arising from the manufacturing of steered-fibre composites
dc.type
info:eu-repo/semantics/article
dc.rights.accessRights
info:eu-repo/semantics/embargoedAccess
dc.embargo.terms
Cap
dc.date.embargoEndDate
info:eu-repo/date/embargoEnd/2026-01-01
dc.type.version
info:eu-repo/semantics/publishedVersion
dc.identifier.doi
dc.identifier.idgrec
026167
dc.contributor.funder
dc.relation.ProjectAcronym