DUGiDocsInfluence of processing conditions on manufacturing polyamide parts by ultrasonic molding
Text Complet
Influence-processing-conditions.pdf
Sol·licita còpia a l'autor de l'article
En omplir aquest formulari esteu demanant una còpia de l'article dipositat al repositori institucional (DUGiDocs) al seu autor o a l'autor principal de l'article. Serà el mateix autor qui decideixi lliurar una còpia del document a qui ho sol•liciti si ho creu convenient. En tot cas, la Biblioteca de la UdG no intervé en aquest procés ja que no està autoritzada a facilitar articles quan aquests són d'accés restringit.
Compartir
Ultrasonic molding is a new manufacturing process for producing small and micro polymeric components where the material is plasticized using vibration energy. In small parts manufacturing, replicability is usually demanded. Downscaled tensile specimens were manufactured using ultrasonic molding on polyamide pellets not only to obtain specimens, but also to investigate the influence of the processing conditions on process performance and material characterization. A modeling approach is proposed to assess the energy flow involved in the process. It was observed that 300 mg of polyamide could be plasticized and injected in less than 3 s and the results showed a relationship between the processing conditions and the final product, i.e. the higher the values of applied pressure, ultrasonic time and vibration amplitude, the more accurate and more homogeneous parts were. Moreover, the material did not suffer chemical degradation, but light variation on the molecular weight and different chain alignment along the specimen were detected. The mechanical properties measured were slightly influenced by the processing conditions and were in accordance with what would be expected for that particular material when being processed using conventional injection molding
Tots els drets reservats