Finite-thickness cohesive elements for modeling thick adhesives

​
orcId Sarrado Molina, Carlos​ ​ scopusId Sarrado Molina, Carlos​ ​
Sarrado Molina, Carlos
​ ​ ​ ​
Leone, Frank A.
orcId Turon Travesa, Albert​ researcherId Turon Travesa, Albert​ scopusId Turon Travesa, Albert​ ​
Turon Travesa, Albert
Texto Completo
Finite-thickness.pdf embargoed access ​
Solicita copia
Solicita copia
Al rellenar este formulario estáis solicitando una copia del artículo, depositado en el repositorio institucional (DUGiDocs), a su autor o al autor principal del artículo. Será el mismo autor quien decidirá enviar una copia del documento a quien lo solicite si lo considera oportuno. En todo caso, la Biblioteca de la UdG no interviene en este proceso ya que no está autorizada a facilitar artículos cuando éstos son de acceso restringido.
​
Compartir
​
A new cohesive element formulation is proposed for modeling the initial elastic response, softening, and failure of finite-thickness adhesives. By decoupling the penalty stiffness of the cohesive zone model formulation and the physical adhesive modulus, the new formulation ensures proper dissipation of fracture energy for opening and shear loading modes and mixed-mode loading conditions with any combination of elastic and fracture material properties. Predictions are made using the new element formulation for double cantilever beam, end-notched flexure, mixed-mode bending and single lap joint specimens with varying adhesive thicknesses. Good correlation between all predictions and experimental results was observed ​
​Tots els drets reservats
Mostrar el registro completo del ítem