Browsing by Subject "Mecànica de fractura"

An Engineering Solution for using Coarse Meshes in the Simulation of Delamination with Cohesive Zone Models

A Thermodynamically Consistent Damage Model for Advanced Composites

Universality class of fiber bundles with strong heterogeneities

Critical ruptures in a bundle of slowly relaxing fibers

Estudi de les propietats elàstiques i de fractura de teixits plans de fibra

DFP open access ​

​

Avalanche dynamics of fiber bundle models

Nominal strength of quasi-brittle open hole specimens under biaxial loading conditions

Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs

Compact tension specimen for orthotropic materials

On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints

Short and long-term cracking behaviour of GFRP reinforced concrete beams

An experimental data reduction method for the Mixed Mode Bending test based on the J-integral approach

Damage tolerance optimization of composite stringer run-out under tensile load

A simulation method for high-cycle fatigue-driven delamination using a cohesive zone model

An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws

A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test

Finite-thickness cohesive elements for modeling thick adhesives

Effect of environment conditioning on mode II fracture behaviour of adhesively bonded joints

Characterization of debonding between two different materials with beam like geometries

Transition time threshold for Double Cantilever Beam specimens under high loading rates

Experimental Characterization and Analysis of the In-Plane Elastic Properties and Interlaminar Fracture Toughness of a 3D-Printed Continuous Carbon Fiber-Reinforced Composite

Environmental effects on the cohesive laws of the composite bonded joints

Assessing the effect of the experimental parameters in the evaluation of the essential work of fracture in high-strength thin sheets

Analysis of mode I fracture toughness of adhesively bonded joints by a low friction roller wedge driven quasi-static test