Visualitzant Departament d'Enginyeria Mecànica i de la Construcció Industrial per matèria "Materials -- Testing"

An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials

A Thermodynamically Consistent Damage Model for Advanced Composites

Design procedure and simplified equations for the flexural capacity of concrete members reinforced with fibre-reinforced polymer bars

Cracking and deflections in GFRP RC beams: An experimental study

Effect of material properties on long-term deflections of GFRP reinforced concrete beams

Forming force in Single Point Incremental Forming under different bending conditions

An experimental study of different factors affecting the bond of NSM FRP bars in concrete

Prediction of concrete shrinkage occurring prior to external loading and effect on short-term constitutive modeling and design

Comparative analysis of deformations and tension-stiffening in concrete beams reinforced with GFRP or steel bars and fibers

Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete

Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams

Nominal strength of quasi-brittle open hole specimens under biaxial loading conditions

Experimental study of tension stiffening in GFRP RC tensile members under sustained load

Flexural response of reinforced concrete (RC) beams strengthened with near surface mounted (NSM) fibre reinforced polymer (FRP) bars

Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming

Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs

An energy based failure criterion for matrix crack induced delamination in laminated composite structures

Design of Non-Conventional CFRP Laminates for Improved Damage Resistance and Damage Tolerance

Damage occurrence at edges of non-crimp-fabric thin-ply laminates under off-axis uniaxial loading

Modelling of tension-stiffening in bending RC elements based on equivalent stiffness of the rebar

Experimental and analytical investigation into the flexural performance of RC beams with partially and fully bonded NSM FRP bars/strips

On the validity of linear elastic fracture mechanics methods to measure the fracture toughness of adhesive joints

Experimental study of bond-slip of GFRP bars in concrete under sustained loads

Short and long-term cracking behaviour of GFRP reinforced concrete beams