Internal geometric modelling of 3D woven composites: A comparison between different approaches
dc.contributor.author
dc.date.accessioned
2017-03-14T12:50:52Z
dc.date.available
2017-03-14T12:50:52Z
dc.date.issued
2015-11-15
dc.identifier.issn
0263-8223
dc.identifier.uri
dc.description.abstract
The mechanical behaviour of 3D woven composite materials is affected by deformations as resulting from the manufacturing process. The present study is based on comparison of three different methodologies to predict the internal yarn geometries of 3D through-thickness orthogonal interlock. The first approach idealises the geometry, which is obtained directly from manufacturing parameters assuming constant elliptical cross-sections. The second technique generates the yarn geometry from the Digital Element Method, which simulates the compaction process of the material. The last method considered is an analytical method defining longitudinal and transverse contours, which describe the undulation of fill, warp and binder yarns. The yarn geometries from the different methods are numerically analysed using voxel finite element analysis to determine the global volume fraction and the elastic properties. The results are also compared with experimental values to determine the strengths and weaknesses of each approach. The first approach is quicker than the others although the geometry is not the most accurate. The second and third method have a good match between the predicted geometry and optical micrograph of the fabric and the elastic properties are very similar for both methods
dc.description.sponsorship
This work has been partially funded by the Spanish Government (Ministerio de Economia y Competitividad) and the European Union under contract DPI2012-34465
dc.format.mimetype
application/pdf
dc.language.iso
eng
dc.publisher
Elsevier
dc.relation
info:eu-repo/grantAgreement/MINECO//DPI2012-34465/ES/EVALUACION DE COMPOSITES LAMINADOS DE CAPAS FINAS PARA APLICACIONES AERONAUTICAS Y AEROESPACIALES/
dc.relation.isformatof
Reproducció digital del document publicat a: http://dx.doi.org/10.1016/j.compstruct.2015.07.007
dc.relation.ispartof
© Composite Structures, 2015, vol. 132, p. 1219-1230
dc.relation.ispartofseries
Articles publicats (D-EMCI)
dc.rights
Tots els drets reservats
dc.subject
dc.title
Internal geometric modelling of 3D woven composites: A comparison between different approaches
dc.type
info:eu-repo/semantics/article
dc.rights.accessRights
info:eu-repo/semantics/embargoedAccess
dc.embargo.terms
Cap
dc.date.embargoEndDate
info:eu-repo/date/embargoEnd/2026-01-01
dc.type.version
info:eu-repo/semantics/publishedVersion
dc.identifier.doi
dc.identifier.idgrec
023953
dc.contributor.funder
dc.relation.ProjectAcronym
dc.identifier.eissn
1879-1085