DUGiDocsInvestigation of the enthalpy/entropy variation and structure of Ni–Mn–Sn (Co, In) melt-spun alloys
Text Complet
Investigation-of-the-enthalpy.pdf
Sol·licita còpia a l'autor de l'article
En omplir aquest formulari esteu demanant una còpia de l'article dipositat al repositori institucional (DUGiDocs) al seu autor o a l'autor principal de l'article. Serà el mateix autor qui decideixi lliurar una còpia del document a qui ho sol•liciti si ho creu convenient. En tot cas, la Biblioteca de la UdG no intervé en aquest procés ja que no està autoritzada a facilitar articles quan aquests són d'accés restringit.
Compartir
The effect of In and Co additions on the structure and thermal properties of melt-spun process Ni–Mn–Sn alloys has experimentally investigated at a solidification rate of ~48 m s−1. The present study reports on the analysis of the microstructure, martensitic transformation of Ni50Mn42.5Sn7.5, Ni50Mn37.5Sn7.5Co5 and Ni50Mn37Sn6.5In6.5. Heusler alloys produced by melt spinning. The crystal structures of the fabricated alloys were determined by means of X-ray diffraction. While the as-spun alloy Ni50Mn42.5Sn7.5 displayed a single-phase (14M monoclinic martensite) structure at room temperature, the as-spun Ni50Mn37.5Sn7.5Co5 displayed a main martensitic phase of a four-layered orthorhombic (4O) structure and the as-spun Ni50Mn37Sn6.5In6.5 displayed a single-phase cubic Heusler L21. The characteristic transformation temperatures and the thermodynamic parameters of the samples were determined by differential scanning calorimetry measurements. This study investigated the effect of the substitution of Co by Mn in Ni50Mn42.5−xSn7.5Cox. The martensitic transformation temperatures, enthalpy and entropy changes were found to increase progressively with doping Co content and the effect of the substitution of In by Mn. The martensitic transformation temperatures, enthalpy and entropy changes were found to decrease progressively with doping In
Tots els drets reservats