DUGiDocsNet-tension strength of double lap joints taking into account the material cohesive law
Text Complet
Net-tension-strength.PDF
Sol·licita còpia a l'autor de l'article
En omplir aquest formulari esteu demanant una còpia de l'article dipositat al repositori institucional (DUGiDocs) al seu autor o a l'autor principal de l'article. Serà el mateix autor qui decideixi lliurar una còpia del document a qui ho sol•liciti si ho creu convenient. En tot cas, la Biblioteca de la UdG no intervé en aquest procés ja que no està autoritzada a facilitar articles quan aquests són d'accés restringit.
Compartir
Bolted/pinned joints are common elements in many engineering structures and their failure can lead to catastrophic failure of these structures. Therefore, their strength prediction is essential for an accurate design of the joints and, consequently, for the reliable design of the structure. The main objective of this paper is to introduce an analytical model to predict the net-tension strength of mechanically fastened joints in isotropic quasi-brittle structures. The model is formulated based on the cohesive zone model. The effect of the material cohesive law, the contact stress distribution due to presence of the bolt, the specimen size and the hole radius to specimen width ratio on the strength of the joint are considered in the present model. The obtained predictions are compared with the available experimental results with good agreement. The present model is capable of introducing simple design charts for the bolted joints in structures made of isotropic quasi-brittle materials
Tots els drets reservats